Top Hammer Rock Drilling Tools
Hand Held and Small Hole Drilling tools
H22 Tapered Tools
H22 12° Taper Drilling Tools
| BITS | Buttons, mm | Flushing hole, mm | Angle | Dimensions, D | Part Number | Compatibility | |||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||
| Cross Bit | |||||||||
 | - | - | 1x6 | 2x4.5 | - | 1 1/4" | 32mm | TH-N32-H22/B | 7770-9032-42 90503024 90512643 |
| - | - | 1x6.35 | 2x4.5 | - | 1 3/8" | 45mm | TH-N45-H22 | 7770-9045-42 90503069 |
|
| Button Bit | |||||||||
 | 1x7 | 4x7 | 1x5 | 1x5 | 35° | 1 1/8" | 28mm | TH-N28-H22 | 7795-6428-B48 90510695 90516429 |
| 1x7 | 4x7 | 1x5 | 1x5 | 35° | 1 3/16" | 30mm | TH-N30-H22 | 7795-6430-B48 90510181 |
|
| Button Bit | |||||||||
 | 2x7 | 5x7 | 2x4 | 1x4 | 40° | 1 1/4" | 32mm | TH-N32-H22 | 7795-5232-B48 90509650 90509841 |
| 2x7 | 5x8 | 2x4 | 1x4 | 40° | 1 3/8" | 35mm | TH-N35-H22 | 7795-5235-B48 90509535 |
|
| 2x7 | 5x9 | 2x5 | 1x5 | 40° | 1 1/2" | 38mm | TH-N38-H22 | 7795-5238-B48 90512658 |
|
| Button Bit | |||||||||
 | 2x7 | 5x7 | 2x4 | 1x4 | 40° | 1 9/64" | 33mm | TH-N33-H22/B | 7770-5233-B48 90513909 |
| 2x7 | 5x8 | 2x4 | 1x4 | 40° | 1 3/8" | 35mm | TH-N35-H22/B | 7770-5235-B48 90509535 |
|
| Button Bit | |||||||||
 | 2x7 | 5x7 | 1x4 | 1x6 | 35° | 1 9/64" | 33mm | TH-N33-H22/C | 7770-4433-B48 90509535 |
| Button Bit | |||||||||
 | 2x7 | 6x7 | 2x4 | 1x4 | 40° | 1 9/64" | 33mm | TH-N33-H22/D | 7770-5433-B48 90003511 |
| 2x7 | 6x8 | 2x4 | 1x4 | 40° | 1 3/8" | 35mm | TH-N35-H22/C | 7770-5435-B48 | |
| Button Bit | |||||||||
 | 2x7 | 6x7 | 2x4 | 1x5 | 40° | 1 9/64" | 33mm | TH-N33-H22/E | 5770-5433M-B49 90512825 |
| 2x7 | 6x8 | 2x4 | 1x5 | 40° | 1 9/64" | 33mm | TH-N33-H22/F | 5770-5433M-B70 | |
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||
H22 12° Taper Drill Rods
| DRILL RODS | Dimensions | Part Number | Compatibility | |||
| Length | Diameter | |||||
| Imperial | Metric | Imperial | Metric | |||
| Tapered rod, shank 22 x 108, carburized | ||||||
 | 2' | 610mm | 7/8" | 22mm | TH-H22-610C | 7870-6106-11 90504832 |
| 4' | 1220mm | 7/8" | 22mm | TH-H22-1220C | 7870-6112-11 90505433 |
|
| 6' | 1830mm | 7/8" | 22mm | TH-H22-1830C | 7870-6118-11 90505434 |
|
| 6'7" | 2000mm | 7/8" | 22mm | TH-H22-2000C | 7870-6120-11 90504839 |
|
| 8' | 2440mm | 7/8" | 22mm | TH-H22-2440C | 7870-6124-11 90505436 |
|
| 10' | 3050mm | 7/8" | 22mm | TH-H22-3050C | 7870-6131-11 90505437 |
|
| 10'6" | 3200mm | 7/8" | 22mm | TH-H22-3200C | 7870-6132-11 90504844 |
|
| 12' | 3660mm | 7/8" | 22mm | TH-H22-3660C | 7870-6137-11 90505438 |
|
| 14' 1 1/2" | 4300mm | 7/8" | 22mm | TH-H22-4300C | 7870-6143-11 | |
| Tapered rod, shank 22 x 108, Hardened | ||||||
 | 8' | 2440mm | 7/8" | 22mm | TH-H22-2440H | 7870-1124-11 90504841 |
| 10'6" | 3200mm | 7/8" | 22mm | TH-H22-3200H | 7870-1132-11 90504844 |
|
| 13' 1 1/2" | 4000mm | 7/8" | 22mm | TH-H22-4000H | 7870-1140-11 90504846 |
|
| 14'5" | 4400mm | 7/8" | 22mm | TH-H22-4400H | 7870-1144-11 | |
| 15'9" | 4800mm | 7/8" | 22mm | TH-H22-4800H | 7870-1148-11 90504847 |
|
| 18' 4 1/2" | 5600mm | 7/8" | 22mm | TH-H22-5600H | 7870-1156-11 90504848 |
|
| 21' | 6400mm | 7/8" | 22mm | TH-H22-6400H | 7870-1164-11 90504849 |
|
| 23' 7 1/2" | 7200mm | 7/8" | 22mm | TH-H22-7200H | 7870-1172-11 90504850 |
|
| 26'3" | 8000mm | 7/8" | 22mm | TH-H22-8000H | 7870-1180-11 90504851 |
|
| 28' 10 1/2" | 8800mm | 7/8" | 22mm | TH-H22-8800H | 7870-1188-11 | |
| Tapered rod, shank 25 x 108, Carburized | ||||||
 | 14' | 4300mm | 1" | 25mm | TH-H25-4300C | 7870-7143-30 |
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | ||||||
H22 11° Taper Drilling Tools
| BITS | Flushing Hole, mm | Buttons, mm | Angle | Dimensions, D | Part Number | Compatibility | |||||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||||
| Button Bit | |||||||||||
| 1x5 | 1x5 | 2x7 | 5x7 | 40° | 1 1/4" | 32mm | TH-N32-11-H22 | 7776-4432-B48 90512816 |
||
| 1x5 | 1x5 | 2x7 | 5x8 | 40° | 1 3/8" | 35mm | TH-N35-11-H22 | 7776-4435-B48 90512818 |
|||
| 1x5 | 1x5 | 2x7 | 5x8 | 35° | 1 7/16" | 36mm | TH-N36-11-H22 | 7776-4436-B48 90509968 |
|||
| 1x5 | 1x6 | 2x7 | 5x8 | 35° | 1 1/2" | 38mm | TH-N38-11-H22 | 7776-4438-B48 90509966 |
|||
| 1x5 | 1x6 | 2x8 | 5x9 | 35° | 1 37/64" | 40mm | TH-N40-11-H22 | 7776-4440-B48 90509962 |
|||
| DRILL RODS | Dimensions | Part Number | Compatibility | ||||||||
| Length | Diameter | ||||||||||
| Imperial | Metric | Imperial | Metric | ||||||||
| Tapered-Rod-Shank-22-11'-Tapered-Carburized | |||||||||||
| 2' | 610mm | 7/8" | 22mm | TH-H22/11-610C | 7876-6106-11 | |||||
| 2' 7 1/2" | 800mm | 7/8" | 22mm | TH-H22/11-800C | 7876-6108-11 90504864 |
||||||
| 4' | 1220mm | 7/8" | 22mm | TH-H22/11-1220C | 7876-6112-11 90504865 |
||||||
| 5'3" | 1600mm | 7/8" | 22mm | TH-H22/11-1600C | 7876-6116-11 90500144 |
||||||
| 6' | 1830mm | 7/8" | 22mm | TH-H22/11-1830C | 7876-6118-11 90504868 |
||||||
| 6'7" | 2000mm | 7/8" | 22mm | TH-H22/11-2000C | 7876-6120-11 90504869 |
||||||
| 8' | 2440mm | 7/8" | 22mm | TH-H22/11-2440C | 7876-6124-11 90505441 |
||||||
| 10' | 3050mm | 7/8" | 22mm | TH-H22/11-3050C | 7876-6131-11 | ||||||
| 11' 9 1/2" | 3600mm | 7/8" | 22mm | TH-H22/11-3600C | 7876-6136-11 90510203 |
||||||
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||||
H22 7° Taper Drilling Tools
| BITS | Flushing Hole, mm | Buttons, mm | Angle | Dimensions, D | Part Number | Compatibility | |||||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||||
| Button Bit | |||||||||||
| 2x5 | 1x5 | 2x7 | 5x7 | 40° | 1 1/4" | 32mm | TH-N32-7-H22 | 7788-5232-B48 90512799 |
||
| 2x4 | 1x4 | 2x7 | 5x7 | 40° | 1 9/64" | 33mm | TH-N33-7-H22 | 7788-5233-B48 90515546 |
|||
| 2x4 | 1x4 | 2x7 | 5x8 | 40° | 1 3/8" | 35mm | TH-N35-7-H22 | 7788-5235-B48 90512922 |
|||
| 2x4 | 1x4 | 2x7 | 5x8 | 35° | 1 1/2" | 38mm | TH-N38-7-H22 | 7788-5238-B48 90515584 |
|||
| DRILL RODS | Dimensions | Part Number | Compatibility | ||||||||
| Length | Diameter | ||||||||||
| Imperial | Metric | Imperial | Metric | ||||||||
| Tapered Rod Shank 22 7' Tapered Carburized | |||||||||||
| 8' | 2400mm | 7/8" | 22mm | TH-H22/7-2400C | 7888-6124-11 90515483 |
|||||
| 10' 6" | 3200mm | 7/8" | 22mm | TH-H22/7-3200C | 7888-6132-11 90516583 |
||||||
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||||
H22 (7/8") Integral Drill Steels
| Shank 22x108mm (7/8"x4 1/4") | Series | Dimensions | Part Number | Compatibility | |||
| Length | Diameter | ||||||
| Imperial | Metric | Imperial | Metric | ||||
 | 11 | 2'7" | 800mm | 1 11/32" | 34mm | TH-H22-800/34 | 714-0834-65 90503753 |
| 5'3" | 1600mm | 1 19/64" | 33mm | TH-H22-1600/33 | 714-1633-65 90503757 |
||
| 7'10" | 2400mm | 1 1/4" | 32mm | TH-H22-2400/32 | 714-2432-65 90503761 |
||
| 10'6" | 3200mm | 1 7/32" | 31mm | TH-H22-3200/31 | 714-3231 90503763 |
||
| 13'1" | 4000mm | 1 3/16" | 30mm | TH-H22-4000/30 | 714-4030 90503764 |
||
| 15'9" | 4800mm | 1 9/64" | 29mm | TH-H22-4800/29 | 714-4829 90503765 |
||
| 18'4" | 5600mm | 1 7/64" | 28mm | TH-H22-5600/28 | 714-5628-50 90503766 |
||
| 21' | 6400mm | 1 1/16" | 27mm | TH-H22-6400/27 | 714-6427-50 90503767 |
||
| 23' 8" | 7200mm | 1 1/32" | 26mm | TH-H22-7200/26 | 714-7226-50 90504197 |
||
| 12 | 2'7" | 800mm | 1 37/64" | 40mm | TH-H22-800/40 | 714-0840-65 90503754 |
|
| 5'3" | 1600mm | 1 17/32" | 39mm | TH-H22-1600/39 | 714-1639-65 90503758 |
||
| 7'10" | 2400mm | 1 1/2" | 38mm | TH-H22-2400/38 | 714-2438-65 90503762 |
||
| 10'6" | 3200mm | 1 29/64" | 37mm | TH-H22-3200/37 | 714-3237-65 90503801 |
||
| 13'1" | 4000mm | 1 27/64" | 36mm | TH-H22-4000/36 | 714-4036-65 90503798 |
||
| 15'9" | 4800mm | 1 3/8" | 35mm | TH-H22-4800/35 | 714-4835-65 90503866 |
||
| 18'4" | 5600mm | 1 11/32" | 34mm | TH-H22-5600/34 | 714-5634-65 90503867 |
||
| 21' | 6400mm | 1 19/64" | 33mm | TH-H22-6400/33 | 714-6433-65 90503868 |
||
| 23'8" | 7200mm | 1 1/4" | 32mm | TH-H22-7200/32 | 714-7232-65 90504222 |
||
| 13 | 1'4" | 400mm | 1 11/32" | 34mm | TH-H22-400/34 | 714-0434-65 90503769 |
|
| 2'7" | 800mm | 1 19/64" | 33mm | TH-H22-800/33 | 714-0833-65 90504245 |
||
| 3"11" | 1200mm | 1 1/4" | 32mm | TH-H22-1200/32 | 714-1232-65 90503755 |
||
| 6'7" | 2000mm | 1 3/16" | 30mm | TH-H22-2000/30 | 714-2030 90503759 |
||
| 14 | 2' | 600mm | 1 3/8" | 35mm | TH-H22-600/35 | 714-0635-65 90503752 |
|
| 3'11" | 1200mm | 1 11/32" | 34mm | TH-H22-1200/34 | 714-1234-65 90503756 |
||
| 5'11" | 1800mm | 1 19/64" | 33mm | TH-H22-1800/33 | 714-1833-65 90503855 |
||
| 7'10" | 2400mm | 1 1/4" | 32mm | TH-H22-2400/32 | 714-2432-65 90503761 |
||
| 15 | 2' | 600mm | 1 5/8" | 41mm | TH-H22-600/41 | 714-0641-65 90504195 |
|
| 3'11" | 1200mm | 1 37/64" | 40mm | TH-H22-1200/40 | 714-1240-65 90503852 |
||
| 5'11" | 1800mm | 1 17/32" | 39mm | TH-H22-1800/39 | 714-1839-65 90503851 |
||
| 7'10" | 2400mm | 1 1/2" | 38mm | TH-H22-2400/38 | 714-2438-65 90503762 |
||
| 16 | 6'7" | 2000mm | 1 19/64" | 33mm | TH-H22-2000/33 | 714-2033-65 90503760 |
|
| 26'3" | 8000mm | 1 1/32" | 26mm | TH-H22-8000/26 | 714-8026-50 90504198 |
||
| 28'11" | 8800mm | 1" | 25mm | TH-H22-8800/25 | 714-8825-5005 | ||
| 31'6" | 9600 | 1" | 25mm | TH-H22-9600/25 | 714-9625-5005 90504798 |
||
| 17 | 5'3" | 1600mm | 1 7/64" | 28mm | TH-H22-1600/28 | 714-1628-50 90504420 |
|
| 7'10" | 2400mm | 1 1/16" | 27mm | TH-H22-2400/27 | 714-2427-50 90503641 |
||
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||
R23 Drilling tools
| BITS | Flushing Hole, mm | Buttons, mm | Angle | Dimensions, D | Part Number | Compatibility | |||||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||||
| Button Bit | |||||||||||
 | 1x4 | 1x6 | 2x7 | 5x7 | 35° | 1 5/16" | 33mm | TH-N33-R23 | 7737-4433-R48 | ||
| 1x6 | 1x6 | 2x7 | 5x8 | 40° | 1 3/8" | 35mm | TH-N35-R23 | 7737-5235-R48 | |||
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R23 | 7737-5238A-R48 | |||
| 1x6 | 1x6 | 2x8 | 5x9 | 35° | 1 5/8" | 41mm | TH-N41-R23 | 7737-5241-R48 | |||
| Button Bit | |||||||||||
 | 3x4.5 | - | 3x8 | 6x9 | 40° | 1 3/4" | 45mm | TH-N45-R23 | 7737-5345-R48 | ||
| DRILL RODS | Dimensions | Part Number | Compatibility | ||||||||
| Length | Diameter | ||||||||||
| Imperial | Metric | Imperial | Metric | ||||||||
| Shank adapter, Hex 22 - R23 | |||||||||||
 | 10 3/4" | 255mm | 7/8" | 22mm | TH-H22-R23-255/22 | 7807-6103-11 | |||||
| 2'7" | 800mm | 7/8" | 22mm | TH-H22-R23-800/22 | 7807-6108-11 | ||||||
| 5'3" | 1600mm | 7/8" | 22mm | TH-H22-R23-1600/22 | 7807-6116-11 | ||||||
| 8' | 2440mm | 7/8" | 22mm | TH-H22-R23-2440/22 | 7807-6124-11 | ||||||
| 10' | 3200mm | 7/8" | 22mm | TH-H22-R23-3200/22 | 7807-6132-11 | ||||||
| 11' 9 5/8" | 3600mm | 7/8" | 22mm | TH-H22-R23-3600/22 | 7807-6136-11 | ||||||
| MF Rod, R23 - H22 - R23 | |||||||||||
 | 6' 10 1/2' | 2095mm | 7/8" | 22mm | TH-R23-H22-R23-2095 | 7857-4821-20 | |||||
| 10' | 3050mm | 7/8" | 22mm | TH-R23-H22-R23-3050 | 7857-4831-20 | ||||||
| Shank adapter, Hex 25 - R23 | |||||||||||
 | 10 3/64 | 255mm | 1" | 25mm | TH-H25-R23-255/25 | 7807-7103-30 | |||||
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||||
R25 Drilling Tools
| BITS | Flushing Hole, mm | Buttons, mm | Angle | Dimensions, D | Part Number | Compatibility | |||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||
| Cross Bit | |||||||||
| 1x5 | 2x5 | - | - | - | 1 3/8" | 35mm | TH-X35-R25 | 7732-1435-42 90514221 |
| Button Bit | |||||||||
 | 1x5 | 1x6 | 2x7 | 5x7 | 45° | 1 5/16" | 33mm | TH-N33-R25 | 7732-4433C-S48 90510448 |
| 1x4 | 1x6 | 2x7 | 5x9 | 30° | 1 3/8" | 35mm | TH-N35-R25 | 7732-4435-S48 90505181 |
|
| 1x5 | 1x6 | 2x7 | 5x9 | 30° | 1 7/16" | 37mm | TH-N37-R25 | 7732-4437C-S48 90513899 |
|
| 1x6 | 1x6 | 2x7 | 5x8 | 40° | 1 3/8" | 35mm | TH-N35-R25/B | 7732-5235-R48 90509723 |
|
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R25 | 7732-5238-R48 90505179 |
|
| 1x6 | 1x6 | 2x8 | 5x9 | 35° | 1 5/8" | 41mm | TH-N41-R25 | 7732-5241-S48 90505175 |
|
| Button Bit | |||||||||
 | 3x4.5 | - | 3x8 | 6x9 | 40° | 1 3/4" | 45mm | TH-N45-R25 | 7732-5345F-R48 90510208 |
| 3x4.5 | 1x4.5 | 3x8 | 6x10 | 30° | 1 7/8" | 48mm | TH-N48-R25 | 7732-5348A-S48 90513912 |
|
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||
| DRILL RODS | Dimensions | Part Number | Compatibility | |||
| Length | Diameter | |||||
| Imperial | Metric | Imperial | Metric | |||
| MF-Rod, R25 - Hex 25 - R25 | ||||||
 | 4' | 1220mm | 1" | 25mm | TH-R25-1220/25 | 7852-3112-20 |
| 10' | 3025mm | 1" | 25mm | TH-R25-3025/25 | 7852-313025-20 | |
| 12' | 3660mm | 1" | 25mm | TH-R25-3660/25 | 7852-3137-20 | |
| Shank Adapter, Hex 25 - R25 | ||||||
 | 7'10" | 2400mm | 1" | 25mm | TH-R25-2400/25 | 7802-7124-30 90500568 |
| 12'3" | 3735mm | 1" | 25mm | TH-R25-3735/25 | 7802-71373-30 | |
| Shank Adapter, Hex 22 - R25 | ||||||
 | 10 3/64" | 255mm | 7/8" | 22mm | TH-R25-255/22 | 7802-6103-11 90000237 |
| 2'7" | 800mm | 7/8" | 22mm | TH-R25-800/22 | 7802-6108-11 90510004 |
|
| 3'3" | 1000mm | 7/8" | 22mm | TH-R25-1000/22 | 7802-6110-11 90531258 |
|
| Extension Rod, R25 - Hex 25 - R25 | ||||||
 | 3' | 915mm | 1" | 25mm | TH-R25-915/25-E | 7852-2309-20 |
| 4' | 1220mm | 1" | 25mm | TH-R25-1220/25-E | 7852-2312-20 | |
| 5' | 1525mm | 1" | 25mm | TH-R25-1525/25-E | 7852-2315-20 | |
| 6' | 1830mm | 1" | 25mm | TH-R25-1830/25-E | 7852-2318-20 | |
| 8' | 2435mm | 1" | 25mm | TH-R25-2435/25-E | 7852-2324-20 | |
| 10' | 3050mm | 1" | 25mm | TH-R25-3050/25-E | 7852-2331-20 | |
| Coupling Sleeve, R25 | ||||||
 | 6 1/4" | 160mm | 1 3/8" | 35mm | TH-R25-160/35 | 7992-3335 |
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | ||||||
R28 Drilling tools
| BITS | Flushing Hole, mm | Buttons, mm | Angle | Dimensions, D | Part Number | Compatibility | |||
| Front No Size | Gauge No Size | Front No Size | Gauge No Size | Imperial | Metric | ||||
| Button Bit | |||||||||
| 1x5 | 1x6 | 2x7 | 5x9 | 30° | 1/16" | 37mm | TH-N37-R28 | 7739-5237-S48 90514167 |
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R28 | 7739-5238-R48 90514282 |
|
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R28/B | 7739-5238-S48 90514705 |
|
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R28/C | 7739-5238-S70 | |
| 1x6 | 1x6 | 2x7 | 5x9 | 35° | 1 1/2" | 38mm | TH-N38-R28/D | 7739-5238-S80 | |
| 1x6 | 1x6 | 2x8 | 5x9 | 35° | 1 5/8" | 41mm | TH-N41-R28 | 7739-5241-S48 90515379 |
|
| 1x6 | 1x6 | 2x8 | 5x10 | 35° | 1 11/16" | 43mm | TH-N43-R28 | 7739-5243-S48 | |
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||||
| REAMING TOOLS | Buttons, mm | Angle | Dimensions | Part Number | Compatibility | ||
| Front No Size | Gauge No Size | Imperial | Metric | ||||
| R28 Reaming Bit, 6° Taper | |||||||
 | 4x8 | 8x9 | 25° | 2 1/2" | 64mm | TH-R64-R28 | 7722-4864-S48 90510459 |
| 4x10 | 8x10 | 30° | 3" | 76mm | TH-R76-R28 | 7722-4876-S48 90510460 |
|
| 6x10 | 8x12 | 35° | 3 1/2" | 89mm | TH-R89-R28 | 7722-4889-S48 90510461 |
|
| Dimensions | Part Number | Compatibility | |||||
| Length | Diameter | ||||||
| Imperial | Metric | Imperial | Metric | ||||
| Pilot Adapter, 6° Taper | |||||||
 | 11 1/4" | 285mm | 1 1/32" | 26mm | TH-R285/26-R28 | 7822-1526 90516259 |
|
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | |||||||
| DRILL RODS | Dimensions | Part Number | Compatibility | |||
| Length | Diameter | |||||
| Imperial | Metric | Imperial | Metric | |||
| MF Rod , R28 - Round 32 - R28 | ||||||
 | 10' | 3050mm | 1 1/4" | 32mm | TH-R28-32-R28-3050 | 7859-5131-20 |
| 12' | 3660mm | 1 1/4" | 32mm | TH-R28-32-R28-3660 | 7859-5137-20 | |
| Drifter Rod, R32 - Hex 28 - R28 | ||||||
 | 8' 1 1/2" | 2475mm | 1 1/8" | 28mm | TH-R32-H28-R28-2475 | 7853-7624-20 90514370 |
| 9' 1 5/8" | 2785mm | 1 1/8" | 28mm | TH-R32-H28-R28-2785 | 7853-7627-20 90514164 |
|
| 10' 1 5/8" | 3090mm | 1 1/8" | 28mm | TH-R32-H28-R28-3090 | 7853-7631-20 90514168 |
|
| 10' 11 1/2" | 3340mm | 1 1/8" | 28mm | TH-R32-H28-R28-3340 | 7853-7633-20 90515496 |
|
| 12' 1 5/8" | 3700mm | 1 1/8" | 28mm | TH-R32-H28-R28-3700 | 7853-7637-20 90514966 |
|
| 14' 1 1/2" | 4305mm | 1 1/8" | 28mm | TH-R32-H28-R28-4305 | 7853-7643-20 | |
| Coupling Sleeve, R32 | ||||||
| 5 29/32" | 150mm | 1 47/64" | 44mm | TH-R28-150/44 | 7993-3644 90515731 |
| While every effort has been made to ensure compatibility it is the clients responsibility to ensure product compatibility before use. | ||||||
Face Drilling/Development Drilling
Face drilling refers to the process of drilling holes directly into the "face" or exposed surface of a rock or mineral deposit in mining, tunneling, and construction activities.
Face drilling requires skilled operators who are knowledgeable about the geological conditions, drilling techniques, and safety protocols. Ensuring the stability of the face during drilling is crucial to prevent accidents, rockfalls, or collapses.
R32 Drilling Tools
| DRILL BIT | Length | Tip Size, mm | Flushing Hole | Weight Approx, kg | Part Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Dome bit for reaming | Spherical buttons | ||||||||
 | 3" | 76mm | 1x13 | 9x13 | 35° | 3 | 1 | 2.0 | 1441-76R32-113/913-45-31 |
| 3 1/2" | 89mm | 1x13 | 14x13 | 35° | 2 | 1 | 2.6 | 1441-89R32-113/1413-45-31 | |
| 4" | 102mm | 1x13 | 16x13 | 35° | 2 | 2 | 3.2 | 1441-102R32-113/1613-45-31 | |
| 5" | 127mm | 1x13 | 18x13 | 35° | 3 | 1 | 4.8 | 1441-127R32-113/1813-45-31 | |
| Parabolic buttons | |||||||||
| 3" | 76mm | 1x13 | 9x13 | 35° | 3 | 1 | 2.0 | 1441-76R32-113/913-45-51 | |
| 3 1/2" | 102mm | 1x13 | 14x13 | 35° | 2 | 2 | 2.6 | 1441-89R32-113/1413-45-51 | |
| 4" | 102 | 1x13 | 16x13 | 35° | 2 | 2 | 3.2 | 1441-102R32-113/1613-45-51 | |
| 5" | 127mm | 1x13 | 18x13 | 35° | 3 | 1 | 4.8 | 1441-127R32-113/1813-45-51 | |
| Cross-type bits | |||||||||
 | 1 3/4" | 45mm | 16x10 | - | 1 | 4 | 0.9 | 1221-45R32-16/10-42-23 | |
| 1 7/8" | 48mm | 16x10 | - | 1 | 4 | 0.9 | 1221-48R32-16/10-42-23 | ||
| 2" | 51mm | 16x10 | - | 1 | 4 | 1.2 | 1221-51R32-16/10-42-23 | ||
| 2 1/4" | 57mm | 16x10 | - | 1 | 4 | 1.3 | 1221-57R32-16/10-42-23 | ||
| 2 1/2" | 64mm | 16x10 | - | 1 | 4 | 1.5 | 1221-64R32-18/13-42-23 | ||
| DRILL ROD | Length | Diameter | Weight Approx kg | Part Number | ||
| Imperial | Metric | Imperial | Metric | |||
| Extension rod R32-Round32-R32 | 3' | 915mm | 1 1/4" | 32mm | 5.4 | 23R32-R32-0915-23 |
| Flushing hole 9.2mm | 3' 3 3/8" | 1000mm | 1 1/4" | 32mm | 5.9 | 23R32-R32-1000-23 |
| Wrench flat 25.4mm | 4' | 1220mm | 1 1/4" | 32mm | 7.2 | 23R32-R32-1220-23 |
 | 6' | 1830mm | 1 1/4" | 32mm | 10.8 | 23R32-R32-1830-23 |
| 8' | 2435mm | 1 1/4" | 32mm | 14.3 | 23R32-R32-2435-23 | |
| 10' | 3050mm | 1 1/4" | 32mm | 17.9 | 23R32-R32-3050-23 | |
| 12' | 3660mm | 1 1/4" | 32mm | 21.5 | 23R32-R32-3660-23 | |
| MF rod R32-Round32-R32 | ||||||
| Flushing hole 9.2mm | 3' | 915mm | 1 1/4" | 32mm | 6.2 | 24R32-R32/46-0915-23 |
| Wrench flat 25.4mm | 4' | 1220mm | 1 1/4" | 32mm | 8.0 | 24R32-R32/46-1220-23 |
 | 5' | 1525mm | 1 1/4" | 32mm | 9.8 | 24R32-R32/46-1525-23 |
| 6' | 1830mm | 1 1/4" | 32mm | 11.6 | 24R32-R32/46-1830-23 | |
| 8' | 2435mm | 1 1/4" | 32mm | 15.1 | 24R32-R32/46-2435-23 | |
| 10' | 3050mm | 1 1/4" | 32mm | 18.7 | 24R32-R32/46-3050-23 | |
| 12' | 3660mm | 1 1/4" | 32mm | 22.3 | 24R32-R32/46-3660-23 | |
| Guide speedrod R32-Round39-R32 | ||||||
| Flushing hole 14.5mm | 10' | 3050mm | 1 1/2" | 39mm | 27.0 | 24R39-R32/46-3050-23 |
 | 12' | 3660mm | 1 1/2" | 39mm | 32.0 | 24R39/R32/46-3660-23 |
| GUIDE TUBE | Length | Diameter | Weight Approx kg | Part Number | ||
| Imperial | Metric | Imperial | Metric | |||
| D46 for bits from 51 - 63mm | ||||||
 | 4' | 1220mm | 1 3/4" | 46mm | 10.0 | 24R46-R32/46-1220-23 |
| 5' | 1525mm | 1 3/4" | 46mm | 12.5 | 24R46-R32/46-1525-23 | |
| 6' | 1830mm | 1 3/4" | 46mm | 14.2 | 24R46-R32/46-1830-23 | |
| 10' | 3050mm | 1 3/4" | 46mm | 25.0 | 24R46-R32/46-3050-23 | |
| COUPLING | Length | Diameter | Thread | Weight Approx kg | Part Number | ||
| Imperial | Metric | Imperial | Metric | ||||
| Coupling sleeves | |||||||
| 6 1/8" | 150mm | 1 3/4" | 44mm | R32 | 1.0 | 32-R32-44-150-23 |
| 6 1/4" | 160mm | 1 3/4" | 44mm | R32 | 1.1 | 31-R32-44-160-23 | |
T38 Drilling Tools
| DRILL BIT | Length | Tip Size, mm | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button Bit | Spherical Buttons | ||||||||
 | 2 1/2" | 64mm | 3x11 | 6x12 | 35° | 3 | - | 1.8 | 1431-64T38-311/612-45-31 |
| 2 1/2" | 64mm | 4x10 | 8x10 | 40° | 2 | - | 1.6 | 1431-64T38-410/810-45-31 | |
| 2 1/2" | 64mm | 3x10, 1x10 | 6x11 | 35° | 3 | - | 1.7 | 1433-64T38-410/611-45-31 | |
| 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 1.9 | 1431-70T38-411/811-45-31 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 30° | 4 | - | 1.9 | 1432-70T38-510/811-45-31 | |
| 2 3/4" | 70mm | 3x10, 1x10 | 6x12 | 35° | 3 | - | 1.8 | 1433-70T38-410/612-45-31 | |
 | 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 2.4 | 1431-76T38-411/811-45-31 |
| 3" | 76mm | 5x11 | 8x13 | 35° | 2 | 1 | 2.4 | 1431-76T38-511/813-45-31 | |
| 3" | 76mm | 3x11, 1x11 | 6x12 | 35° | 3 | 1 | 2.6 | 1433-76T38-411/612-45-31 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 2.6 | 1432-76T38-511/812-45-31 | |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 40° | 4 | - | 2.6 | 1432-76T38-511/811-45-31 | |
 | 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 3.3 | 1431-89T38-413/813-45-31 |
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | - | 3.3 | 1431-89T38-513/813-45-31 | |
| 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 3.3 | 1431-89T38-611/812-45-31 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 3.3 | 1433-89T38-511/613-45-31 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 3.3 | 1433-89T38-511/813-45-31 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 3.3 | 1432-89T38-513/813-45-31 | |
| Parabolic Buttons | |||||||||
 | 2 1/2" | 64mm | 3x11 | 6x12 | 35° | 3 | - | 1.8 | 1431-64T38-311/612-45-51 |
| 2 1/2" | 64mm | 4x10 | 8x10 | 40° | 2 | - | 1.6 | 1431-64T38-410/810-45-51 | |
| 2 1/2" | 64mm | 3x10, 1x10 | 6x11 | 35° | 3 | - | 1.7 | 1433-64T38-410/611-45-51 | |
| 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 1.9 | 1431-70T38-411/811-45-51 | |
| 2 3/4" | 70mm | 3x10, 1x10 | 6x12 | 35° | 3 | - | 1.8 | 1433-70T38-410/612-45-51 | |
 | 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 2.4 | 1431-76T38-411/811-45-51 |
| 3" | 76mm | 5x11 | 8x13 | 35° | 2 | 1 | 2.4 | 1431-76T38-511/813-45-51 | |
| 3" | 76mm | 3x11, 1x11 | 6x13 | 35° | 3 | 1 | 2.6 | 1433-76T38-411/613-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 2.6 | 1432-76T38-511/812-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 40° | 4 | - | 2.6 | 1432-76T38-511/811-45-51 | |
 | 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | - | 3.3 | 1431-89T38-513/813-45-51 |
| 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 3.3 | 1431-89T38-611/812-45-51 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 3.3 | 1433-89T38-511/613-45-51 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 3.3 | 1433-89T38-511/813-45-51 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 3.3 | 1432-89T38-513/813-45-51 | |
| DRILL BIT | Length | Tip Size, mm | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button Bit | Spherical Buttons | ||||||||
 | 2 1/2" | 64mm | 4x10 | 8x10 | 30° | 2 | - | 2,.2 | 1531-64T38-410/810-45-31 |
| 2 1/2" | 64mm | 3x10, 1x10 | 6x11 | 35° | 3 | - | 2.2 | 1533-64T38-410/611-45-31 | |
| 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 2.4 | 1531-70T38-411/811-45-31 | |
| 2 3/4" | 70mm | 3x10, 1x10 | 6x13 | 35° | 3 | - | 2.4 | 1533-70T38-410/613-45-31 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.4 | 1632-70T38-510/811-45-31 | |
 | 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 3.3 | 1531-76T38-411/811-45-31 |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 35° | 4 | - | 3.3 | 1632-76T38-511/811-45-31 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 3.3 | 1632-76T38-511/812-45-31 | |
| 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 4.8 | 1531-89T38-413/813-45-31 | |
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | - | 4.8 | 1531-89T38-513/813-45-31 | |
 | 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 4.8 | 1531-89T38-611/812-45-31 |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 4.8 | 1533-89T38-511/813-45-31 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.8 | 1632-89T38-513/813-45-31 | |
| Parabolic Buttons | |||||||||
| 2 1/2" | 64mm | 4x10 | 8x10 | 30° | 2 | - | 2.2 | 1531-64T38-410/810-45-51 | |
 | 2 1/2" | 64mm | 3x10, 1x10 | 6x11 | 35° | 3 | - | 2.2 | 1533-64T38-410/611-45-51 |
| 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 2.4 | 1531-70T38-411/811-45-51 | |
| 2 3/4" | 70mm | 3x10, 1x10 | 6x13 | 35° | 3 | - | 2.4 | 1533-70T38-410/613-45-51 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.4 | 1632-70T38-511/811-45-51 | |
| 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 3.3 | 1531-76T38-411/811-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 35° | 4 | - | 3.3 | 1632-76T38-511/811-45-51 | |
 | 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 3.3 | 1632-76T38-511/812-45-51 |
| 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 4.8 | 1531-89T38-413/813-45-51 | |
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | - | 4.8 | 1531-89T38-513/813-45-51 | |
| 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 4.8 | 1531-89T38-611/812-45-51 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 2 | - | 4.8 | 1533-89T38-611/813-45-51 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.8 | 1632-89T38-513/813-45-51 | |
| Cross type Bit | |||||||||
 | 2 1/2" | 64mm | 25x13 | - | 1 | 2 | 1.9 | 1321-64T38-25/13-42-23 | |
| 3 | 76mm | 25x13 | - | 1 | 2 | 2.5 | 1321-76T38-25/13-42-23 | ||
| 3 1/2" | 89mm | 25x13 | - | 1 | 2 | 2.8 | 1321-89T38-25/13-42-23 | ||
| Dome Bit for Reaming | Spherical Buttons | ||||||||
 | 4" | 102mm | 1x13 | 16x13 | 35° | 2 | 2 | 3.8 | 1441-102T38-113/1613-45-31 |
| 5" | 127mm | 1x13 | 18x13 | 35° | 1 | 3 | 5.2 | 1441-127T38-1813-45-31 | |
| Parabolic Buttons | |||||||||
| 4" | 102mm | 1x13 | 16x13 | 35° | 2 | 2 | 3.8 | 1441-102T38-113/1613-45-51 | |
| 5" | 127mm | 1x13 | 18x13 | 35° | 1 | 3 | 5.2 | 1441-127T38-113/1813-45-51 | |
| Drill Rod | Length | Diameter | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | |||
| Extension rod T38-Round39-T38 | 4' | 1220mm | 1 1/2" | 39mm | 10.2 | 23R39-T38-1220-23 |
| Flushing hole 14.5mm | 5' | 1525mm | 1 1/2" | 39mm | 12.8 | 23R39-T38-1525-23 |
| Wrench flat 32mm | 6' | 1830mm | 1 1/2" | 39mm | 15.3 | 23R39-T38-1830-23 |
 | 8' | 2435mm | 1 1/2" | 39mm | 20.4 | 23R39-T38-2435-23 |
| 10' | 3050mm | 1 1/2" | 39mm | 25.5 | 23R39-T38-3050-23 | |
| 12' | 3660mm | 1 1/2" | 39mm | 30.9 | 23R39-T38-3660-23 | |
| 13' | 3965mm | 1 1/2" | 39mm | 33.2 | 23R39-T38-3965-23 | |
| 14' | 4270mm | 1 1/2" | 39mm | 35.7 | 23R39-T38-4270-23 | |
| 16' | 4880mm | 1 1/2" | 39mm | 41.0 | 23R39-T38-4880-23 | |
| 18' 1 1/2" | 5530mm | 1 1/2" | 39mm | 46.3 | 23R39-T38-5530-23 | |
| 20' | 6095mm | 1 1/2" | 39mm | 50.9 | 23R38-T38-6095-23 | |
| MF rod T38-Round39-T38 | 3' | 915mm | 1 1/2" | 39mm | 10.7 | 24R39-T38/57-0915-23 |
| Flushing hole 14.5mm | 4' | 1220mm | 1 1/2" | 39mm | 13.3 | 24R39-T38/57-1220-23 |
 | 5' | 1525mm | 1 1/2" | 39mm | 15.8 | 24R39-T38/57-1525-23 |
| 6' | 1830mm | 1 1/2" | 39mm | 18.3 | 24R39-T38/57-1830-23 | |
| 10' | 3050mm | 1 1/2" | 39mm | 28.5 | 24R39-T38/57-3050-23 | |
| 12' | 3660mm | 1 1/2" | 39mm | 33.6 | 24R39-T38/57-3660-23 | |
| 14' | 4270mm | 1 1/2" | 39mm | 38.7 | 24R39-T38/57-4270-23 | |
| 16' | 4880mm | 1 1/2" | 39mm | 43.7 | 24R39-T38/57-4880-23 | |
| 18' 1 1/2" | 5530mm | 1 1/2" | 39mm | 49.2 | 24R39-T38/57-5530-23 | |
| 20' | 6095mm | 1 1/2" | 39mm | 53.9 | 24R39-T38/57-6095-23 | |
| Hex extension rod T38-Hex32-T38 | 4' | 1220mm | 1 1/4" | 32mm | 8.6 | 23H32-T38-1220-23 |
| Flushing hole 9.6mm | 6' | 1830mm | 1 1/4" | 32mm | 12.6 | 23H32-T38-1830-23 |
 | 8' | 2435mm | 1 1/4" | 32mm | 16.6 | 23H32-T38-2435-23 |
| 10' | 3050mm | 1 1/4" | 32mm | 20.8 | 23H32-T38-3050-23 | |
| 12' | 3660mm | 1 1/4" | 32mm | 24.9 | 23H32-T38-3660-23 | |
| Double thread rod T39-Round39-T38 | ||||||
| Flushing hole 14.5mm | ||||||
| Wrench flat 32mm | 10' | 3050mm | 1 3/4" | 46mm | 25.7 | 23R39-T38/2T38-3050-23 |
 | 12' | 3660mm | 1 3/4" | 46mm | 30.9 | 23R39-T38/2T38-3660-23 |
| Guide speedrod T38-Round46-T38 | 6' | 1830mm | 1 3/4" | 46mm | 23.5 | 24R46-T38/57-1830-23 |
 | 10' | 3050mm | 1 3/4" | 46mm | 37.2 | 24R46-T38/57-3050-23 |
| 12' | 3660mm | 1 3/4" | 46mm | 44.0 | 24R46-T38/57-3660-23 | |
| 14' | 4270mm | 1 3/4" | 46mm | 50.9 | 24R46-T38/57-4270-23 | |
| 16' | 4880mm | 1 3/4" | 46mm | 57.7 | 24R46-T38/57-4880-23 | |
| 18' 1 1/2" | 5530mm | 1 3/4" | 46mm | 65.0 | 24R46-T38/57-5530-23 | |
| 20' | 6095mm | 1 3/4" | 46mm | 71.3 | 24R46-T38/57-6095-23 | |
| GUIDE TUBE | Length | Diameter | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | |||
| D56 for bits from 64-67mm | 4' | 1220mm | 2 1/8" | 56mm | 12.6 | 24G56-T38/56-1220-23 |
| D64 for bits from 76-89mm | 5' | 1525mm | 2 1/8" | 56mm | 14 | 24G56-T38/56-1525-23 |
 | 6' | 1830mm | 2 1/8" | 56mm | 17.4 | 24G56-T38/56-1830-23 |
| 10' | 3050mm | 2 1/8" | 56mm | 28.3 | 24G56-T38/56-3050-23 | |
| 12' | 3660mm | 2 1/8" | 56mm | 32.8 | 24G56-T38/56-3660-23 | |
| 16' 2" | 4920mm | 2 1/8" | 56mm | 47.9 | 24G56-T38/56-4920-23 | |
| 12' | 3660mm | 2 1/2" | 64mm | 51 | 24G64-T38/64-3660-23 | |
| COUPLING | Length | Diameter | Thread | Weight Approx kg | Part Number | ||
| Imperial | Metric | Imperial | Metric | ||||
| Coupling sleeves | |||||||
| 7 1/2" | 190mm | 2 5/32" | 55mm | T38 | 2.1 | 31-T38-55-190-23 |
Surface Bench Drilling tools
Bench drilling is an integral part of modern mining and quarrying operations, enabling efficient extraction of valuable resources from the Earth. It requires skilled operators and careful planning to ensure safety, productivity, and environmental responsibility.
Black Diamond Drilling can manufacture and supply compatible drilling equipment for your surface mining needs.
Bench Drilling T45
| DRILL BIT | Length | Tip Size (mm) | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button bit | Spherical buttons | ||||||||
 | 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 2.3 | 1431-70T45-411/811-45-31 |
| 2 3/4" | 70mm | 3x11, 1x9 | 6x11 | 35° | 3 | - | 2.2 | 1431-70T45-411/611-45-31 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.2 | 1431-70T45-510/811-45-31 | |
| 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 2.6 | 1431-70T45-411/811-45-31 | |
| 3" | 76mm | 5x11 | 8x12 | 35° | 2 | 1 | 2.6 | 1431-76T45-511/812-45-31 | |
| 3" | 76mm | 3x11, 1x11 | 6x13 | 35° | 3 | - | 2.4 | 1433-76T45-411/613-45-31 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 2.6 | 1432-76T45-511/812-45-31 | |
 | 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 4.6 | 1431-89T45-413/813-45-31 |
| 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 4.6 | 1431-89T45-611/812-45-31 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 4.1 | 1433-89T45-511/613-45-31 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 4.6 | 1433-89T45-512/812-45-31 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.6 | 1432-89T45-513/813-45-31 | |
 | 4" | 102mm | 5x14 | 8x14 | 40° | 2 | - | 5.0 | 1431-102T45-514/814-45-31 |
| 4" | 102mm | 6x13 | 8x16 | 40° | 2 | 1 | 5.0 | 1431-102T45-613/816-45-31 | |
| 4" | 102mm | 3x13, 2x13 | 6x14 | 35° | 3 | 1 | 4.5 | 1433-102T45-513/614-45-31 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 4.5 | 1433-102T45-513/814-45-31 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 4.5 | 1433-102T45-613/813-45-31 | |
 | Parabolic Buttons | ||||||||
| 2 3/4" | 70mm | 3x11, 1x9 | 6x11 | 35° | 3 | - | 2.2 | 1433-70T45-411/611-45-51 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.2 | 1432-70T45-510/811-45-51 | |
 | 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 2.6 | 1431-76T45-411/811-45-51 |
| 3" | 76mm | 5x11 | 8x12 | 35° | 2 | 1 | 2.6 | 1431-76T45-511/812-45-51 | |
| 3" | 76mm | 3x11, 1x11 | 6x13 | 35° | 3 | 1 | 2.4 | 1433-76T45-411/613-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 35° | 4 | - | 2.6 | 1432-76T45-511/811-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 2.6 | 1432-76T45-511/812-45-51 | |
 | 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 4.6 | 1431-89T45-413/813-45-51 |
| 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 4.6 | 1431-89T45-611/812-45-51 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 4.1 | 1433-89T45-511/613-45-51 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 4.6 | 1433-89T45-511/812-45-51 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.6 | 1432-89T45-513/813-45-51 | |
| DRILL BIT | Length | Tip Size(mm) | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button Bit | Spherical buttons | ||||||||
 | 2 3/4" | 70mm | 4x11 | 8x11 | 40° | 2 | - | 2.5 | 1531-70T45-411/811-45-31 |
| 2 3/4" | 70mm | 3x11, 1x9 | 6x11 | 35° | 3 | - | 2.5 | 1533-70T45-411/611-45-31 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.5 | 1632-70T45-510/811-45-31 | |
| 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 3.2 | 1531-76T45-411/811-45-31 | |
| 3" | 76mm | 5x11 | 8x12 | 35° | 2 | 1 | 3.2 | 1531-76T45-511/812-45-31 | |
| 3" | 76mm | 3x11, 1x11 | 6x13 | 35° | 3 | - | 3.2 | 1533-76T445-411/613-45-31 | |
 | 3" | 76mm | 4x11, 1x11 | 8x11 | 35° | 4 | - | 3.2 | 1632-76T45-511/811-45-31 |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 3.2 | 1632-76T45-511/812-45-31 | |
| 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 5.4 | 1531-89T45-413/813-45-31 | |
| 3 1/2" | 89mm | 6X11 | 8X12 | 35° | 2 | - | 5.4 | 1531-89T45-611/812-45-31 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 5.4 | 1533-89T45-511/613-45-31 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 5.4 | 1533-89T45-511/812-45-31 | |
 | 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 5.4 | 1632-89T45-513/813-45-31 |
| 4" | 102mm | 5x14 | 8x14 | 40° | 2 | - | 6.8 | 1531-102T45-514/814-45-31 | |
| 4" | 102mm | 6x13 | 8x16 | 40° | 2 | 1 | 6.8 | 1531-102T45-613/816-45-31 | |
| 4" | 102mm | 3x13, 2x13 | 6x14 | 35° | 3 | 1 | 6.8 | 1533-102T45-513/614-45-31 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 6.8 | 1533-102T45-513/814-45-31 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 6.8 | 1533-102T45-613/813-45-31 | |
 | Parabolic buttons | ||||||||
| 2 3/4" | 70mm | 3x11, 1x9 | 6x11 | 35° | 3 | - | 2.5 | 1533-70T45-411/611-45-51 | |
| 2 3/4" | 70mm | 4x10, 1x10 | 8x11 | 35° | 4 | - | 2.5 | 1632-70T45-510/811-45-51 | |
| 3" | 76mm | 4x11 | 8x11 | 40° | 2 | - | 3.2 | 1531-76T45-411/811-45-51 | |
| 3" | 76mm | 5x11 | 8x12 | 35° | 2 | 1 | 3.2 | 1531-76T45-511/812-45-51 | |
 | 3" | 76mm | 3x11, 1x11 | 6x13 | 35° | 3 | 1 | 3.2 | 1533-76T45-411/613-45-51 |
| 3" | 76mm | 4x11, 1x11 | 8x11 | 35° | 4 | - | 3.2 | 1632-76T45-511/811-45-51 | |
| 3" | 76mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 3.2 | 1632-76T45-511/812-45-51 | |
| 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 5.4 | 1531-89T45-413/813-45-51 | |
 | 3 1/2" | 89mm | 6x11 | 8x12 | 35° | 2 | - | 5.4 | 1531-89T45-611/812-45-51 |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 3 | 1 | 5.4 | 1533-89T45-511/613-45-51 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x12 | 35° | 4 | - | 5.4 | 1533-89T45-511/812-45-51 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 5.4 | 1632-89T45-513/813-45-51 | |
| Dome Bit for Reaming | Spherical buttons | ||||||||
 | 5" | 127mm | 1x13 | 18x13 | 35° | 3 | 1 | 6.0 | 1441-127T45-113/1813-45-31 |
| 6" | 152mm | 2x14 | 18x14 | 35° | 3 | 1 | 10.6 | 1441-152T45-214/1814-45-31 | |
| Parabolic buttons | |||||||||
| 5" | 127mm | 1x13 | 18x13 | 35° | 3 | 1 | 6.0 | 1441-127T45-113/1813-45-51 | |
| 6" | 152mm | 2x14 | 18x14 | 35° | 3 | 1 | 10.6 | 1441-152T45-214/1814-45-51 | |
| DRILL ROD | Length | Diameter | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | |||
| Extension rod T45-Round46-T45 | 6' | 1830mm | 1 3/4" | 46mm | 21.6 | 23R46-T45-1830-23 |
| Flushing hole 17mm | 8' | 2435mm | 1 3/4" | 46mm | 28.3 | 23R46-T45-2435-23 |
| Wrench flat 38mm | 10' | 3050mm | 1 3/4" | 46mm | 35.2 | 23R46-T45-3050-23 |
 | 12' | 3660mm | 1 3/4" | 46mm | 42.1 | 23R46-T45-3660-23 |
| 14' | 4270mm | 1 3/4" | 46mm | 48.9 | 23R46-T45-4270-23 | |
| 18' | 5530mm | 1 3/4" | 46mm | 63.0 | 23R46-T45-5530-23 | |
| 20' | 6095mm | 1 3/4" | 46mm | 69.3 | 23R46-T45-6095-23 | |
| MF rod T45-Round46-T45 | 5' | 1525mm | 1 3/4" | 46mm | 21.2 | 24R46-T45/65-1525-23 |
| Flushing hole 17mm | 6' | 1830mm | 1 3/4" | 46mm | 24.6 | 24R46-T45/65-1830-23 |
 | 10' | 3050mm | 1 3/4" | 46mm | 38.2 | 24R46-T45/65-3050-23 |
| 12' | 3660mm | 1 3/4" | 46mm | 45.0 | 24R46-T45/65-3660-23 | |
| 14' | 4270mm | 1 3/4" | 46mm | 51.9 | 24R46-T45/65-4270-23 | |
| 18' | 5530mm | 1 3/4" | 46mm | 66.0 | 24R46-T45/65-5530-23 | |
| 20' | 6095mm | 1 3/4" | 46mm | 72.3 | 24R46-T45/65-6095-23 | |
| Guide speedrod T45-Round52-T45 | 10' | 3050mm | 2" | 52mm | 46.6 | 24R52-T45/65-3050-23 |
| Flushing hole 21.5mm | 12' | 3660mm | 2" | 52mm | 55.8 | 24R52-T45/65-3660-23 |
 | 14' | 4270mm | 2" | 52mm | 63.8 | 24R52-T45/65-4270-23 |
| 18' | 5530mm | 2" | 52mm | 81.5 | 24R52-T45/65-5530-23 | |
| 20' | 6095mm | 2" | 52mm | 89.4 | 24R52-T45/65-6095-23 | |
| GUIDE TUBE | Length | Diameter | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | |||
| D64 for bits from 76-89mm | 4' | 1220mm | 2 1/8" | 64mm | 12.6 | 24G64-T45/64-1220-23 |
| D76 for bits from 89-102mm | 5' | 1525mm | 2 1/8" | 64mm | 14.0 | 24G64-T45/64-1525-23 |
 | 6' | 1830mm | 2 1/8" | 64mm | 17.4 | 24G64-T45/64-1830-23 |
| 10' | 3050mm | 2 1/8" | 64mm | 28.3 | 24G64-T45/64-3050-23 | |
| 12' | 3660mm | 2 1/8" | 64mm | 32.8 | 24G64-T45/64-3660-23 | |
| 6' | 1830mm | 3" | 76mm | 40.0 | 24G76-T45/76-1830-23 | |
| 12' | 3660mm | 3" | 76mm | 77.8 | 24G76-T45/76-3660-23 | |
| COUPLING | Length | Diameter | Thread | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | ||||
| Coupling sleeves | |||||||
| 8 1/4" | 210mm | 2 33/64" | 63mm | T45 | 3.0 | 31-T45-63-210-23 |
| 8 1/4" | 210mm | 2 37/64" | 66mm | T45 | 3.3 | 31-T45-66-210-23 | |
Bench Drilling T51
| DRILL BIT | Length | Tip Size(mm) | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button Bit | Spherical buttons | ||||||||
 | 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 4.9 | 1431-89T51-413/813-45-31 |
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | 1 | 4.9 | 1431-89T51-513/813-45-31 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 4 | - | 4.9 | 1433-89T51-511/613-45-31 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 4.9 | 1433-89T51-511/813-45-31 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.9 | 1432-89T51-513/813-45-31 | |
 | 4" | 102mm | 1x14 | 8x14 | 40° | 2 | - | 5.8 | 1431-102T51-414/814-45-31 |
| 4" | 102mm | 6x13 | 8x16 | 35° | 2 | 1 | 5.8 | 1431-102T51-613/816-45-31 | |
| 4" | 102mm | 3x13, 2x13 | 6x14 | 35° | 3 | 1 | 5.2 | 1433-102T51-513/614-45-31 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 5.8 | 1433-102T51-513/814-45-31 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 5.8 | 1433-102T51-613/813-45-31 | |
 | 4 1/2" | 115mm | 6x14 | 8x14 | 35° | 2 | - | 6.8 | 1431-115T51-614/814-45-31 |
| 4 1/2" | 115mm | 6x14 | 8x16 | 35° | 2 | - | 6.8 | 1431-115T51-614/816-45-31 | |
| 4 1/2" | 115mm | 4x13, 2x13 | 8x14 | 35° | 4 | - | 6.8 | 1433-115T51-613/814-45-31 | |
| 4 1/2" | 115mm | 4x13, 3x13 | 8x14 | 35° | 4 | - | 6.8 | 1433-115T51-713/814-45-31 | |
| 4 1/2" | 115mm | 4x14, 2x14 | 8x16 | 35° | 4 | - | 6.8 | 1433-115T51-614-816-45-31 | |
| 5" | 127mm | 8x14 | 8x16 | 35° | 2 | 1 | 7.5 | 1431-127T51-814/816-45-31 | |
| 5" | 127mm | 4x16, 2x13 | 8x16 | 35° | 4 | - | 7.5 | 1433-127T51-616/816-45-31 | |
| 5" | 127mm | 4x14, 3x14 | 8x14 | 35° | 4 | - | 7.5 | 1433-127T51-714/814-45-31 | |
 | Parabolic buttons | ||||||||
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | 1 | 4.9 | 1431-89T51-513/813-45-51 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 4 | - | 4.9 | 1433-89T51-511/613-45-51 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 4.9 | 1433-89T51-511/813-45-51 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 4.9 | 1432-89T51-513/813-45-51 | |
 | 4" | 102mm | 4x14 | 8x14 | 40° | 2 | - | 5.8 | 1431-102T51-414/814-45-51 |
| 4" | 102mm | 6x13 | 8x16 | 35° | 2 | 1 | 5.8 | 1431-102T51-613/816-45-51 | |
| 4" | 102mm | 3x13, 2x13 | 6x14 | 35° | 3 | 1 | 5.2 | 1433-102T51-513/614-45-51 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 5.8 | 1433-102T51-513/814-45-51 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 5.8 | 1433-102T51-613/813-45-51 | |
 | 4 1/2" | 115mm | 6x14 | 8x16 | 35° | 2 | - | 6.8 | 1431-115T51-614/816-45-51 |
| 4 1/2" | 115mm | 4x13, 2x13 | 8x14 | 35° | 4 | - | 6.8 | 1433-115T51-613/814-45-51 | |
| 4 1/2" | 115mm | 4x13, 3x13 | 8x14 | 35° | 4 | - | 6.8 | 1433-115T51-713/814-45-51 | |
| 4 1/2" | 115mm | 4x14, 2x14 | 8x16 | 35° | 4 | - | 6.8 | 1433-115T51-614/816-45-51 | |
| DRILL BIT | Length | Tip Size(mm) | Flushing Hole | Weight Approx kg | Product Number | ||||
| Imperial | Metric | Front | Gauge | Angle | Front | Side | |||
| Button bit | Spherical buttons | ||||||||
 | 3 1/2" | 89mm | 4x13 | 8x13 | 40° | 2 | - | 5.3 | 1531-89T51-413/813-45-31 |
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | 1 | 5.3 | 1531-89T51-513/813-45-31 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 4 | - | 5.3 | 1533-89T51-511/613-45-31 | |
| 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 5.3 | 1533-89T51-511/813-45-31 | |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 5.3 | 1632-89T51-513/813-45-31 | |
 | 4" | 102mm | 4x14 | 8x14 | 40° | 2 | - | 7.3 | 1531-102T51-414/814-45-31 |
| 4" | 102mm | 6x13 | 8x16 | 35° | 2 | 1 | 7.3 | 1531-102T51-613/816-45-31 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 7.3 | 1533-102T51-513/814-45-31 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 7.3 | 1533-102T51-613/813-45-31 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | 1 | 7.3 | 1533-102T51-513/814-45-31 | |
 | 4 1/2" | 115mm | 6x14 | 8x14 | 35° | 2 | - | 9.8 | 1531-115T51-614/814-45-31 |
| 4 1/2" | 115mm | 6x14 | 8x16 | 35° | 2 | - | 9.8 | 1531-115T51-614/816-45-31 | |
| 4 1/2" | 115mm | 4x13, 2x13 | 8x14 | 35° | 4 | - | 9.8 | 1533-115T51-613/814-45-31 | |
| 4 1/2" | 115mm | 4x13, 3x13 | 8x14 | 35° | 4 | - | 9.8 | 1533-115T51-713/814-45-31 | |
| 4 1/2" | 115mm | 4x14, 2x14 | 8x16 | 35° | 4 | - | 9.8 | 1533-115T51-614/816-45-31 | |
 | 5" | 127mm | 8x14 | 8x16 | 35° | 2 | 1 | 12.0 | 1531-127T51-814/816-45-31 |
| 5" | 127mm | 4x16, 2x13 | 8x16 | 35° | 4 | - | 12.0 | 1533-127T51-616/816-45-31 | |
| 5" | 127mm | 4x14, 3x14 | 8x14 | 35° | 4 | - | 12.0 | 1533-127T51-714/814-45-31 | |
| Parabolic buttons | |||||||||
| 3 1/2" | 89mm | 5x13 | 8x13 | 35° | 2 | 1 | 5.3 | 1531-89T51-513/813-45-51 | |
| 3 1/2" | 89mm | 3x11, 2x11 | 6x13 | 35° | 4 | - | 5.3 | 1533-89T51-511/613-45-51 | |
 | 3 1/2" | 89mm | 4x11, 1x11 | 8x13 | 35° | 4 | - | 5.3 | 1533-89T51-511/813-45-51 |
| 3 1/2" | 89mm | 4x13, 1x13 | 8x13 | 35° | 4 | - | 5.3 | 1632-89T51-513/813-45-51 | |
| 4" | 102mm | 4x13 | 8x14 | 40° | 2 | - | 7.3 | 1531-102T51-414/814-45-51 | |
| 4" | 102mm | 6x13 | 8x16 | 35° | 2 | 1 | 7.3 | 1531-102T51-613/816-45-51 | |
| 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | - | 7.3 | 1533-102T51-513/814-45-51 | |
| 4" | 102mm | 4x13, 2x13 | 8x13 | 35° | 4 | 1 | 7.3 | 1533-102T51-613/813-45-51 | |
 | 4" | 102mm | 4x13, 1x13 | 8x14 | 35° | 4 | 1 | 7.3 | 1533-102T51-513/814-45-51 |
| 4 1/2" | 115mm | 6x14 | 8x16 | 35° | 2 | - | 9.8 | 1531-115T51-614/816-45-51 | |
| 4 1/2" | 115mm | 4x13, 2x13 | 8x14 | 35° | 4 | - | 9.8 | 1533-115T51-613/814-45-51 | |
| 4 1/2" | 115mm | 4x13, 3x13 | 8x14 | 35° | 4 | - | 9.8 | 1533-115T51-713/814-45-51 | |
| 4 1/2" | 115mm | 4x14, 2x14 | 8x16 | 35° | 4 | - | 9.8 | 1533-115T51-614/816-45-51 | |
| Dome Bit for Reaming | Spherical buttons | ||||||||
 | 6" | 152mm | 2x14 | 18x14 | 35° | 3 | 1 | 10.6 | 1441-152T51-214/1814-45-31 |
| Parabolic buttons | |||||||||
| 6" | 152mm | 2x14 | 18x14 | 35° | 3 | 1 | 10.6 | 1441-152T51-214/1814-45-51 | |
| DRILL ROD | Length | Diameter | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | |||
| Extension rod T51-Round52-T51 | ||||||
| Flushing hole 21.5mm | 10' | 3050mm | 2" | 52mm | 45.3 | 23R52-T51-3050-23 |
| Wrench flat 45mm | 12' | 3660mm | 2" | 52mm | 54.1 | 23R52-T51-3660-23 |
 | 14' | 4270mm | 2" | 52mm | 63.0 | 23R52-T51-4270-23 |
| 16' | 4880mm | 2" | 52mm | 71.8 | 23R52-T51-4880-23 | |
| 18' | 5530mm | 2" | 52mm | 81.2 | 23R52-T51-5530-23 | |
| 20' | 6095mm | 2" | 52mm | 89.4 | 23R52-T51-6095-23 | |
| MF rod T45-Round46-T45 | 5' | 1525mm | 2" | 52mm | 26.2 | 24R52-T51/72-1525-23 |
| Flushing hole 17mm | 6' | 1830mm | 2" | 52mm | 30.6 | 24R52-T51/72-1830-23 |
 | 10' | 3050mm | 2" | 52mm | 48.3 | 24R52-T51/72-3050-23 |
| 12' | 3660mm | 2" | 52mm | 57.1 | 24R52-T51/72-3660-23 | |
| 14' | 4270mm | 2" | 52mm | 66.0 | 24R52-T51/72-4270-23 | |
| 16' | 4880mm | 2" | 52mm | 74.8 | 24R52-T51/72-4880-23 | |
| 18' | 5530mm | 2" | 52mm | 84.2 | 24R52-T51/72-5530-23 | |
| 20' | 6095mm | 2" | 52mm | 92.4 | 24R52-T51/72-6095-23 | |
| GUIDE TUBE | Length | Diameter | Weight Approx kg | Part Number | ||
| Imperial | Metric | Imperial | Metric | |||
| D76 for bits from 89-102mm | 6' | 1830mm | 3" | 76mm | 42.0 | 24G76-T51/76-1830-23 |
| D87 for bits from 102-127mm | 12' | 3660mm | 3" | 76mm | 81.0 | 24G76-T51/76-3660-23 |
 | 12' | 3660mm | 3 1/2" | 87mm | 86.0 | 24G87-T51/87-3660-23 |
| Coupling Sleeves | Length | Diameter | Thread | Weight Approx kg | Product Number | ||
| Imperial | Metric | Imperial | Metric | ||||
| 7 7/8" | 225mm | 2 51/64" | 71mm | T51 | 4.6 | 31-T51-71-225-23 |
| 7 7/8" | 225mm | 3" | 76mm | T51 | 4.8 | 31-T51-76-225-23 | |
| 9 1/4" | 235mm | 2 7/8" | 72mm | T51 | 4.7 | 31-T51-72-235-23 | |
| 9 1/4" | 235mm | 3 1/32" | 77mm | T51 | 4.9 | 31-T51-77-235-23 | |
Coupling Components
Semi-Bridge Coupling
- Small non threaded central bridge
- Most suited to high torque machines
Full-Bridge Coupling
- Used for surface applications
- Maintains tighter joins
- Better uncoupling characteristics
- Best suited to machines with independent rotation
Adaptor Coupling
- Useful when there is a need to change from one thread size or type to another
- Typically used in special circumstances
Fishing Tools
Fishing tools
| FISHING TOOLS | Dimensions | Thread | Part Number | ||||||
| D | D1 | Length, L | |||||||
| Imperial | Metric | Imperial | Metric | Imperial | Metric | ||||
| Fishing Sleeve | |||||||||
 | R32 Round/Hex rods/coupling sleeves | 1 59/64" | 49mm | 1 55/64" | 47.2mm | 11 13/16" | 300mm | R32 | TH-FSLEEVE-R32 |
| R38 Round rods/coupling sleeves | 2 23/64" | 60mm | - | - | 1' 1 57/64" | 353mm | R38 | TH-FSLEEVE-R38 | |
| T35 Round rods and coupling sleeves | 2 3/64" | 52mm | 1 31/32" | 50mm | 11 3/16" | 284mm | T35 | TH-FSLEEVE-T35 | |
| T38 Round rods/coupling sleeves/MF rods | 2 13/32" | 61mm | 2 19/64" | 58.2mm | 1' 1 57/64" | 353mm | T38 | TH-FSLEEVE-T38 | |
| T45 Round rods/coupling sleeves | 2 51/64" | 71mm | 2 41/64" | 67mm | 10 53/64" | 275mm | T45 | TH-FSLEEVE-T45 | |
| T51 Round rods/coupling sleeves/MF rods | 3 15/64" | 82mm | 3 5/64" | 78.2mm | 1' 5 21/64" | 440mm | T51 | TH-FSLEEVE-T51 | |
| BT50 rods | 3 5/8" | 92mm | 3 7/16" | 87.5mm | 1' 5 23/32" | 450mm | BT60 | TH-FSLEEVE-BT60 | |
| BT68 | 4 1/64" | 102mm | 3 37/64" | 91mm | 1' 3 5/32" | 385mm | BT68 | TH-FSLEEVE-BT68 | |
| Fishing pike | |||||||||
 | R32 rods | 49/64" | 19.4mm | 5/32" | 4mm | 11 1/32" | 280mm | R32 | TH-FPIKE-R32 |
| T38 rods | 49/64" | 19.4mm | 5/16" | 8mm | 9 21/64" | 237mm | T38 | TH-FPIKE-T38 | |
| T45 rods | 1" | 25mm | 5/16" | 8mm | 10 53/64" | 275mm | T45 | TH-FPIKE-T45 | |
| T51 rods | 1 1/16" | 27mm | 19/32" | 15mm | 11 7/32" | 285mm | T51 | TH-FPIKE-T51 | |
| BT58 tubes | 1 17/32" | 39mm | 53/64" | 21mm | 12 33/64" | 318mm | BT58 | TH-FPIKE-BT58 | |
| BT60 rods | 1 31/32" | 50mm | 49/64" | 19.6mm | 1' 7 11/16" | 500mm | BT60 | TH-FPIKE-BT60 | |
| BT68 rods | 1 13/16" | 46mm | 1 7/64" | 28mm | 1' 33/64" | 318mm | BT68 | TH-FPIKE-BT68 | |